| Autonomous flying planes created by James McGrew |
| |
| |
| These autonomously flying planes were made for a research project at MIT. Each plane weighs about 20 grams, and is equipped with a Gasparin GB45S7O motor, MicroInvent MCF5030 prop, MCA3 and MCA3A actuators, MINOR receiver/ESC, 15 mm fiberboard wheels, and a LIPO85-P battery. The wing area is 1 square foot, and the wing loading is about 1 oz/sq ft. These autonomous flyers are covered with RA Microlite film, and Blenderm tape is used for the hinges. |
| |
| Good luck on your project Jim. |
|
