| | MicroInvent |
| MINOR PLUS Receiver |
|
MINOR FLAT PLUS Receiver |
 |
|
 |
| Click image for more photos and info |
|
Click image for more photos and info |
|
|
|
|
|
|
|
|
| MicroInvent FM receiver with electronic speed controller, and crystal |
|
|
| MicroInvent Flat FM receiver with electronic speed controller, and crystal |
|
| |
| Description: |
| | FM negative, or positive shift |
| | Can use with a JR, Hitec, or Futaba Transmitter |
| | Number of channels: | 5 ( 3 with actuators ) |
| | Frequency band: | 72 MHz |
| | Dimensions: | 15 x 10 x 6 mm |
| | Weight: | 0.9 g with wires, without crystal |
| | Power supply voltage: | 2.7 to 5.5 V |
| | Current consumption: | 6 mA |
| | Permanent current of motor: | 2.0 A (2.6 A peak) |
| | • See the Minor Plus manual with connections |
| | diagrams. |
| | |
| | |
| | |
|
|
|
| |
| Description: |
| | FM negative, or positive shift |
| | Can use with a JR, Hitec, or Futaba Transmitter |
| | Number of channels: | 5 ( 3 with actuators ) |
| | Frequency band: | 72 MHz |
| | Dimensions: | 17 x 10 x 4 mm |
| | Weight: | 0.9 g with wires, without crystal |
| | Power supply voltage: | 2.7 to 5.5 V |
| | Current consumption: | 6 mA |
| | Permanent current of motor: | 2.0 A (2.6 A peak) |
| | • Flat MINOR does not have an attached battery |
| | connector. Can use a MRC connector, and |
| | MRC3 to make a power connector. |
| | • See the Minor Plus manual with connections |
| | diagrams. |
|
|
| | |
| Tiny MINOR A Receiver - For Actuators |
|
Tiny MINOR S Receiver - For Servos |
 |
|
|
| Click image for more photos and info |
|
Click image for more photos and info |
|
|
|
|
|
|
|
|
| MicroInvent FM receiver with electronic speed controller, and crystal |
|
|
| MicroInvent Flat FM receiver with electronic speed controller, and crystal |
|
| |
| Description: |
| | Use this RX with actuators |
| | Battery connector included |
| | FM negative, or positive shift |
| | Can use with a JR, Hitec, or Futaba Transmitter |
| | Number of channels: | 4 |
| | Frequency band: | 72 MHz |
| | Dimensions: | 17 x 8 x 4 mm |
| | Weight: | 0.6 g without crystal |
| | Power supply voltage: | 2.7 to 5.5 V |
| | Current consumption: | 5 mA |
| | Permanent current of motor: | 1.0 A (1.3 A peak) |
| | • See the Tiny Minor manual with connections |
| | diagrams. |
| | |
|
|
|
| |
| Description: |
| | Use this RX with servos |
| | Battery connector included |
| | FM negative, or positive shift |
| | Can use with a JR, Hitec, or Futaba Transmitter |
| | Number of channels: | 4 |
| | Frequency band: | 72 MHz |
| | Dimensions: | 17 x 8 x 4 mm |
| | Weight: | 0.6 g without crystal |
| | Power supply voltage: | 2.7 to 5.5 V |
| | Current consumption: | 5 mA |
| | Permanent current of motor: | 1.0 A (1.3 A peak) |
| | • See the Tiny Minor manual with connections |
| | diagrams. |
| | |
|
|
| | |
| | Plantraco |
| Micro9 |
|
Micro9 Butterfly Receiver |
 |
|
 |
| Click image for larger photo |
|
Click image for larger photo |
|
|
|
|
|
|
|
|
| Plantraco Micro9 0.9 gram receiver, and ESC |
|
|
| Plantraco Micro9 Butterfly receiver, and ESC |
|
| |
| Description: |
| | Number of channels: | 3 |
| | Frequency band: | 900 MHz |
| | Dimensions: | 5/8" x 9/16" |
| | Weight: | 0.9 g |
| | Requires: | HFX900 TX |
| | | 10mm Bahoma Battery |
| | | 2 MiniAct or MicroAct actuators |
| | |
|
|
|
| |
| Description: |
| | Pure digital radio link |
| | Number of channels: | 2 |
| | Frequency band: | 900 MHz |
| | Dimensions: | 3/8" x 5/8" |
| | Weight: | 0.38 g |
| | Requires: | HFX900 TX |
| | | 5mm Bahoma Battery |
| | | Soldering, no micro connectors |
|
|
| | |
| 4 Channel Servo Receiver |
|
3 Channel Butterfly Receiver |
 |
|
 |
| Click image for larger photos |
|
Click image for larger photo |
|
|
|
|
|
|
|
|
| Plantraco 4-Channel servo receiver, and ESC |
|
|
| Plantraco 3-Channel Butterfly receiver |
|
| |
| Description: |
| | Pure digital radio link |
| | Number of channels: | 4 |
| | Frequency band: | 900 MHz |
| | Dimensions: | 9/16" x 15/16" |
| | Weight: | 1.2 g |
| | Connectors: | Mini JST |
| | Requires: | HFX900 TX (Model 1 or 2) |
| | | WES, Blue Arrow, or Falcon servos using 'Mini-JST' plugs |
| | | Battery with 'Mini-JST' connector |
| | Includes: | 2 Amp ESC |
| | | Plug and wire for programming |
| | Note: | Can use RX with external brushless ESC |
| | Plantraco 4 Channel Servo manual |
|
|
|
| |
| Description: |
| | Pure digital radio link |
| | Built-In low voltage protection |
| | Number of channels: | 3 |
| | Frequency band: | 900 MHz |
| | Dimensions: | 3/8" x 11/16"" |
| | Weight: | 0.4 g |
| | Requires: | HFX900 TX |
| | | 5mm Bahoma Battery |
| | | Soldering, no micro connectors |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
|
|
| | |
| 4 Channel PlugnPlay Receiver |
|
|
 |
|
|
| Click image for larger photos |
|
|
|
|
|
|
|
|
|
|
| Plantraco 4-Channel PlugnPlay receiver, and ESC |
|
|
|
| |
| Description: |
| | Pure digital radio link |
| | Fully proportional, low voltage cutoff |
| | Number of channels: | 4 |
| | Frequency band: | 900 MHz |
| | Dimensions: | 20 mm x 16 mm x 4.5 mm |
| | Weight: | .95 g |
| | Connector type: | Nano-connector |
| | Requires: | HFX900 TX, or Monolith |
| | Recommended Actuators: | MiniAct or MicroAct |
| | Recommended Batteries: | LiPo LP90 - LP200 |
| | Battery connector type: | 10mm Bahoma |
| | Range: | 100 m |
| | Recommended Input Voltage: | 2.8 - 4.5 VDC |
| | Recommended ESC Current: | Less than 2 Amps |
|
|
|
|
| | |
| | GWS |
| GWS R4PII 4 Channel Pico Receiver |
|
|
 |
|
|
| Click image for larger photos |
|
|
|
|
|
|
|
|
|
|
| GWS R4PII 4 Channel Pico RX |
|
|
|
| |
| Description: |
| | Number of channels: | 4 |
| | Frequency band: | 72 MHz |
| | Dimensions: | .59" x 1" x .34" |
| | Weight: | 4.8 g |
| | Reception Mode: | FM-PPM |
| | Operating Voltage: | 3.6 to 7.2V |
| | Antenna Length: | 50 cm |
|
|
|
|
| page updated: 07/29/08 |
|
|
|
| Copyright © 2008 Air Midi Micros. All rights reserved. |
|
| |
|
|
| |
| |
