| If you like cool looking micro planes that are fun to fly then look no further. These printed depron foam profile planes with a 10" wingspan weigh about 12 grams when ready to fly. During calm conditions you can fly Micro Racers outdoors in the yard, or at the park. Also, fly leisurely indoors at the gym, or participate in some indoor pylon racing. The Micro Racers are 3 channel planes that have an elevator, and rudder with full proportional control. P-51 Miss America video (40.9 MB) with rudder control. Or if you would like, create some ailerons to replace the rudder control on your Micro Racers plane. Watch this video (15.1 MB) to see an aileron plane, and see it in flight (6.7 MB). See below for more details of these micro flyers. |
|
| The Planes |
 |
| |
| What's Inside The Kit |
 |
| Laser cut depron plane, control horns, z bends and figure 4's, carbon fiber control rods, carbon fiber fusestrip, motor reinforcements, prop, heat shrink tubing, and landing gear (for some models). |
|
| |
| What's Needed To Fly The Plane |
| HFX900 Deluxe Starter Set 2 |
 |
Click image for more details |
| |
| Or If You Would Like To Use Your Own 72 MHz Transmitter Use |
| • MicroInvent MINOR RX |
| • MicroInvent MCA1, or MCA2 actuators |
| • MicroInvent 85, or 130 mAh LiPo battery |
| • Plantraco 7mm Coreless Motor |
| • Plantraco Tri-Turbofan Propeller |
|
| Or Make Your Own Plane, And Put What You Want On It. |
 |
| |
| P-51 Invader |
|
P-51 Miss America |
|
| Yellow Jacket |
|
Shoestring #16 |
|
|
|
|
| $12.00 | In Stock | $12.00 | In Stock |
|
| $12.00 | In Stock | $12.00 | In Stock |
|
|
|
|
| |
| Plane Description: |
| | Model Flight Weight: | Approx. 12 grams |
| | Wingspan: | 10" |
| | Controlled Elements: | Rudder, Elevator, Motor |
| | Flying Speed: | 2 to 4 m/s |
| | | |
| | | |
| | | |
| | | |
|
|
| Other recommended products: |
| Additional Tri-Turbofan Propellers |
|
|
